Enclosure accessories - Flange plates, gland plates & accessories for electrical enclosures  | icotek แผงควบคุมสำหรับอุปกรณ์เสริม - แผ่นแปลน แผ่นต่อม และอุปกรณ์เสริมสำหรับเปลือกหุ้มด้วยไฟฟ้า |  icotek Aksesori penutup - Pelat flensa, pelat kelenjar & aksesori untuk penutup listrik |  icotekMga accessory ng enclosure - Mga flange plate, gland plate at accessories para sa mga electrical enclosure | icotek Phụ kiện vỏ bọc - Tấm mặt bích, tấm đệm & phụ kiện cho vỏ tủ điện 
 icotek enclosure accessories at a glance
For easy assembly of icotek cable entry components and EMC cable shield earthing products as well as for your cable management needs icotek offers useful enclosure accessories. Find out more »
Enclosure base plates for cable entry KDR-BMP. Suitable for e.g. Rittal TS8 enclosures, they can be used instead of the 3-piece standard base plates.
The KDR-ESR is a one-piece plate to be assembled on enclosure bases. Slide frames for the KEL-U / KEL-QUICK cable entry frames are already pre-assembled.
​Enclosure gland plate with slide frames, IP54
Enclosure gland plate with slide frames, suitable for KEL-U cable entry frames.
>> KDR-ESR
PART NO. LIST
DOWNLOAD PDF
​Split enclosure gland plate, IP54
Split enclosure gland plate suitable for mounting KEL cable entry frames.
>> KDR 2
PART NO. LIST
DOWNLOAD PDF
​Enclosure base plate for MP modular gland plates, IP54
Enclosure base plate for mounting of MP modular gland plates. Suitable for Rittal enclosures.
>> KDR-BMP
PART NO. LIST
DOWNLOAD PDF
​Modular gland plates, IP54
Modular gland plate system for mounting cable entry components in Rittal enclosure bases, roofs and divider panels. Suitable for enclosure base plate KDR-BMP.
>> MP
PART NO. LIST
DOWNLOAD PDF
​Enclosure base gland plate with brush grommet
Split enclosure base gland plate with brush grommets for Rittal TS8 enclosures.
>> KDR-BES
PART NO. LIST
DOWNLOAD PDF
​Universal brush strip with clamp profile
Universal brush strip for cable pass-through on enclosures, cabinets, server racks, panels, machines. Available in your required length!
>> KDR-BES-U
PART NO. LIST
DOWNLOAD PDF
​Split flange plates with brush strips
Split flange plates with brush strips for compact enclosures by Rittal.
>> FP-BES-U
PART NO. LIST
DOWNLOAD PDF
​Flange plates, IP54 - IP66
Flange plates for mounting cable entry components on compact enclosures, terminal boxes or bus enclosures by Rittal and Fibox.
>> FP
PART NO. LIST
DOWNLOAD PDF
​Blank plates, metal / stainless steel, IP66
Blank plates to close and seal unused cut-outs in enclosure or machine walls.
>> BPM
PART NO. LIST
DOWNLOAD PDF
​Blank plates, plastic, for screw assembly, IP64 / UL Type 12
Blank plates to close and seal unused cut-outs in enclosure or machine walls.
>> BPK
PART NO. LIST
DOWNLOAD PDF
​Blank plates, plastic, pluggable, IP54 / UL Type 12
Blank plates to close and seal unused cut-outs in enclosure or machine walls.
>> BPK-RF
PART NO. LIST
DOWNLOAD PDF
​Blank plates for KEL-SNAP mounting frames and KDR-ESR gland plates, IP54
Blank plates to close cut-outs of pre-assembled KEL-SNAP frames and KDR-ESR enclosure gland plates.
>> BPK-SNAP
PART NO. LIST
DOWNLOAD PDF
​Snap-in frames for cable entries, IP54 / UL type 12
Tool-free snap-in mounting frames for KEL, KEL-U and KEL-QUICK.
>> KEL-SNAP
PART NO. LIST
DOWNLOAD PDF
​Drainage device / IP66 / IP67 / IP69K
By using a drainage device, it is possible to safely drain off the condensate without losing a maximum enclosure protection of IP66.
>> Drainage device
PART NO. LIST
DOWNLOAD PDF
​Pressure compensation element with metric thread, IP68
Pressure compensation element with metric thread to avoid water condensation in highly sealed enclosures (IP68)
>> PCE
PART NO. LIST
DOWNLOAD PDF
​Pneumatic bulkhead fittings
The bulkhead fittings for pneumatic hoses are also available individually for use with the adapter grommets.
>> Pneumatic bulkhead fittings
PART NO. LIST
DOWNLOAD PDF
​Hook-and-loop cable ties
​Reusable hook-and-loop cable ties for bundling and fixing of cables or complete cable harnesses, conduits and hoses.
>> KLKB | KLB
PART NO. LIST
DOWNLOAD PDF
​Holders for hook-and-loop cable ties
Holders for hook-and-loop cable ties KLKB. Various mounting types.
>> KBH
PART NO. LIST
DOWNLOAD PDF
​Locknuts, M16-M85
Hexagonal locknuts for cable glands, special locknuts with cut-outs for various connectors and split locknuts for corrugated conduits.
>> KGM | GMT
PART NO. LIST
DOWNLOAD PDF
​Supports for mounting rails
Mounting feet for 10 x 3 mm bus bars and 35 mm top hat DIN rails.
>> MF
PART NO. LIST
DOWNLOAD PDF
​Bus bars
10 x 3 mm copper bus bars for earthing of cables.
>> SSK