​Split cable entry systems for cables with connectors
waterproof with up to IP66 seal - โครงใส่สายเคเบิลสำหรับสายเคเบิลพร้อมขั้วต่อ-กันน้ำได้สูงสุดถึง IP66 ซีล |  Hatiin ang mga sistema ng pagpasok ng cable para sa mga cable na may mga konektor hindi tinatablan ng tubig na may hanggang IP66 seal |  hệ thống đầu vào cáp cho cáp có đầu nối chống thấm nước với con dấu lên đến IP66  | ​ Sistem entri kabel terpisah untuk kabel dengan konektor tahan air dengan segel IP66

​icotek cable entry systems at a glance

​Using the patented grommet based icotek cable entry system, a large number of pre-terminated cables (up to 65 mm in diameter) and cables without connectors (up to 75 mm in diameter) can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66 / UL type 4X rated ingress protection (certified according to EN 60529 / UL50-E). In addition, the cable entry frames serve as strain reliefs on the cable (acc. to EN 62444). The split cable entry system enables quick and easy assembly which is great for retrofits and maintenance.  » More Info

>> Request Your Free Products Sample 

SPLIT CABLE ENTRY FRAMES & GROMMETS | Request Free Samples Products Form

more video

​Info guide – everything you need to know about split cable entry systems
​
The icotek split cable entry systems enable the transit of a large number of connectorised cables or complete cable harnesses in a small area. In contrast to conventional cable glands the connector doesn’t have to be cut off the cable in advance and be re-connected afterwards. Thus, the cable manufacturer's warranty remains and you save a lot of assembly time. But also electrical, pneumatic or hydraulic lines without connectors as well as corrugated conduits and hoses can be easily routed, sealed and strain relieved using split cable entry systems.

​Easy assembly of the cable entry systems
The cable entry systems are either screw mounted or simply snapped into a pre-mounted snap frame. The cable entry systems are available in many different sizes which are mostly based on standard cut-outs of industrial multi-pin heavy duty connectors. Convince yourself of the easy and quick installation of the split cable entry systems with our assembly videos:

More video

Split IP65 flange enclosure for 90° cable entry KEL-FG-ER | Assembly | icotek
​
​icotek KT grommet based flange enclosure with IP65 rated protection for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.

More video

​Well tested & certified

​Approvals and standards such as flame class UL 94-V0, IP and UL rated ingress protection, UL recognized, DNV, RINA, EN 45545-2 and ECOLAB detergent resistance enable icotek cable entry systems to be real alternatives to conventional cable glands. Certificates or declarations of conformity can be requested directly from us.

​Split cable entry frame, IP66 / UL Type 12/4X*
KT grommet based cable entry for standard cut-outs of heavy industrial connectors. Available as single or double row version.
​

>> KEL-ER

PART NO. LIST

​KEL-ER 16/2   black
KEL-ER 16/2   black  V2A
KEL-ER 16/5   black
KEL-ER 16/5   black  V2A
KEL-ER 16/8  black
KEL-ER 16/8   black  V2A
KEL-ER B4 black
KEL-ER B4  black  V2A
KEL-ER B1 black
KEL-ER B1  black  V2A
KEL-ER 10/3 black
KEL-ER 10/3  black  V2A
KEL-ER 10/6 black
KEL-ER 10/6  black  V2A
KEL-ER 24/10 black
KEL-ER 24/10  black  V2A
KEL-ER 24/4 black
KEL-ER 24/4  black  V2A
KEL-ER 24/7 black
KEL-ER 24/7  black  V2A
KEL-ER -E 2 black
KEL-ER -E 2 black V2A
KEL-ER -E 5 black
KEL-ER -E 5 black V2A
KEL-ER -E 3 black
KEL-ER -E 3 black V2A
KEL-ER -E 4 black
KEL-ER -E 4 black V2A

---

​48162
48162.200
48165
48165.200
48168
48168.200
48204
48204.200
48206
48206.200
48212
48212.200
48216
48216.200
48241
48241.200
48244
48244.200
48247
48247.200
48249
48249.200
48250
48250.200
48258
48258.200
48259
48259.200

DOWNLOAD PDF

​Split cable entry frame, IP54 / UL Type 12
KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Available as single or double row version.

>> KEL-U

PART NO. LIST

KEL-U 16/2 CR   black
KEL-U 16/5 CR   black
KEL-U 16/5 CR   black
KEL-U 16/8 CR   black
KEL-U 16/8 CR   black
KEL-U B4 CR   black
KEL-U B4 CR   black
KEL-U  B1 CR   black
KEL-U  B1 CR   black
KEL-U 10/3 CR   black
KEL-U 10/3 CR   black
KEL-U 10/6 CR   black
KEL-U 10/6 CR   black
KEL-U 24/10 CR   black
KEL-U 24/10 CR   black
KEL-U 24/4 CR   black
KEL-U 24/4 CR   black
KEL-U 24/7 CR   black
KEL-U 24/7 CR   black
KEL-U 16/2     black
KEL-U 16/2   black  V2A
KEL-U 16/5   black
KEL-U 16/5   black  V2A
KEL-U 16/8   black
KEL-U 16/8   black  V2A
KEL-U B4   black
KEL-U B4   black  V2A
KEL-U  B1   black
KEL-U  B1    black  V2A
KEL-U 10/3   black
KEL-U 10/3   black  V2A
KEL-U 10/6   black
KEL-U 10/6   black  V2A
KEL-U 24/10   black
KEL-U 24/10  black  V2A
KEL-U 24/4   black
KEL-U 24/4   black  V2A
KEL-U 24/7   black
KEL-U 24/7   black  V2A
_____________________
​54162.601
54165.600
54165.601
54168.600
54168.601
54204.600
54204.601
54206.600
54206.601
54212.600
54212.601
54216.600
54216.601
54241.600
54241.601
54244.600
54244.601
54247.600
54247.601
54162
54162.200
54165
54165.200
54168
54168.200
54204
54204.200
54206
54206.200
54212
54212.200
54216
54216.200
54241
54241.200
54244
54244.200
54247
54247.200

DOWNLOAD PDF

​Split cable entry frame for tool-free assembly, IP54 / UL Type 12
KT grommet based cable entry frames for tool-free assembly. Suitable for standard cut-outs of heavy industrial connectors.
​

>> KEL-FA

PART NO. LIST

​DOWNLOAD PDF

​​Centrally split cable entry frame, IP54 / UL Type 12
Classic KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Also available as multi-row versions.
​

>> KEL

PART NO. LIST

KEL 16/2  black
KEL 16/2   black  V2A
KEL 16/4  black
KEL 16/4   black  V2A
KEL 16/5 black
KEL 16/5   black  V2A
KEL 16/8  black
KEL 16/8  black  V2A
KEL-B4  black
KEL-B4   black  V2A
KEL-B1  black
KEL-B1    black  V2A
KEL 10/3 black
KEL 10/3    black  V2A
KEL 10/6 black
KEL 10/6  black V2A
KEL 24/10 black
KEL 24/10    black  V2A
KEL 24/4 black
KEL 24/4  black  V2A
KEL 24/7 black
KEL 24/7  black  V2A
KEL 24/5 black
KEL 24/5  black  V2A
__________________
​42162
42162.200
42164
42164.200
42165
42165.200
42168
42168.200
42204
42204.200
42206
42206.200
42212
42212.200
42216
42216.200
42241
42241.200
42244
42244.200
42247
42247.200
42248
42248.200

DOWNLOAD PDF

​​Split 90° cable entry enclosure, IP54 / UL Type 12
KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version. ( New products ) 

>> KEL-FG-ER

PART NO. LIST

KEL- FG-A10  black
KEL-FG-A10 black V2A
KEL- FG-A7  black
KEL-FG A7  black V2A
KEL- FG-A4  black
KEL-FG-A4  black V2A
KEL- FG-B4  black
KEL- FG-B4   black V2A
KEL- FG-B1  black
KEL-FG-B1  black V2A
KEL-FG-E2 black
KEL-FG-E2 black V2A
KEL-FG-E3 black
KEL-FG-E3 black V2A
KEL-FG-E5 black
KEL-FG-E5 black V2A
_____________________
​​42320
42320.200
42322
42322.200
42324
42324.200
42330
42330.200
42332
42332.200
42333
42333.200
42334
42334.200
42336
42336.200

DOWNLOAD PDF

​Split cable entry frame for tool-free assembly, IP54 / UL Type 12
QT grommet based cable entry frames for tool-free assembly. Suitable for standard cut-outs of heavy industrial connectors. Available as single or double row version.

>> KEL-QUICK

PART NO. LIST

KEL-Quick 24/10    black
KEL-Quick 16/8      black
KEL-Quick 10/6 black
KEL-Quick B4    black
KEL-Quick 24/7
KEL-Quick 24/4
KEL-Quick 16/5
KEL-Quick 16/2 black
KEL-Quick 10/3
KEL-Quick-E2 black
KEL-Quick-E3 black
KEL-Quick-E4 black
KEL-Quick-E5 black
_____________________
42410
42418
42420
42434
42412
42413
42425
42426
42427
​42421
42422
42423
42424

​DOWNLOAD PDF

>> KEL-QUICK SERIES PDF

​Split cable entry frame for flat cables, IP54
KT/FT grommet based split cable entry frame for flat cables as well as prefabricated round cables.
​

>> KEL-FL

PART NO. LIST

KEL-FL A   black
KEL-FL B   black
KEL-FL C   black
KEL-FL D   black
KEL-FL E    black
KEL-FL F    black
KEL-FL G   black
KEL-FL H   black
KEL-FL I     black
KEL-FL  J    black
KEL-FL K    black
KEL-FL L   black
__________________
​46100
46105
46110
46115
46120
46125
46130
46135
46140
46145
46150
46155

DOWNLOAD PDF

>> KEL-FL SERIES PDF

​Split cable entry frame for large diameters, IP54 / UL Type 12
KT grommet based cable entry frames for supply cables with large diameters of up to 75 mm. Available as single or double row version.

>> KEL-183

PART NO. LIST

KEL183/2 black
KEL183/2   V2A
KEL183/5  black
KEL183/5   black  V2A
KEL183/8  black
KEL183/8   black  V2A
KEL183-E4  black
KEL 183-E4  black  V2A
KEL183-E16   black
KEL183-E16   black  V2A
-----------------------------
47200
47200.200
47220
47220.200
47240
47240.200
47250
47250.200
47255
47255.200​

DOWNLOAD PDF

>> KEL-183 SERIES PDF

​Split cable entry frame for supply lines, IP54 / UL Type 12

Split cable entry frame for supply lines with diameters up to 65 mm.
​

>> KEL-JUMBO

PART NO. LIST

KEL-JUMBO 2  black
KEL-JUMBO 2    black  V2A
KEL-JUMBO 1  black
KEL-JUMBO 1    black  V2A
___________________
42350
42350.200
42360
42360.200

DOWNLOAD PDF

>> KEL-JUMBO SERIES PDF

Cover plugs
The openings at the fastening points of the cable entry plates & frames can be closed with the cover plugs.

>> COVER PLUG

PART NO. LIST

DOWNLOAD PDF

COVER PLUG

Snap-in frames for cable entries, IP54 / UL type 12
Tool-free snap-in mounting frames for KEL, KEL-U and KEL-QUICK.

>> KEL-SNAP

PART NO. LIST

KEL-SNAP-B
KEL-SNAP 10
KEL-SNAP 16
KEL-SNAP 24
KEL-SNAP 24E
KEL-SNAP 24MT
________________
​42038
42039
42040
42042
42044
42046

DOWNLOAD PDF

KEL-SNAP

Split cable glands, IP54 - IP68
Split cable glands for pre-terminated cables (for cut-outs M16 - M80).
​

>>Split cable glands

PART NO. LIST

DOWNLOAD PDF

Cable glands for cables with connectors

Slit cable entry plate for tool-free assembly, IP54
QT grommet based cable entry plate made of elastomer for cables with or without connectors. Snap-in mounting.

>> KEL-QTA

PART NO. LIST

KEL-QTA 50  A
KEL-QTA 50  B
KEL-QTA 32  A
KEL-QTA 32  B
KEL-QTA 24/2/DP18  A
KEL-QTA 24/2/DP18  B
KEL-QTA 24/4  A
KEL-QTA 24/4  B
KEL-QTA 10/1 - DP18   A
KEL-QTA 10/2 - DP6   A
KEL-QTA 10/1 - DP18   B
KEL-QTA 10/2 - DP6   B
KEL-QTA B4  A
_____________________
​43622
43626
43632
43636
43642
43643
43644
43645
43655
43656
43658
43659
43660

DOWNLOAD PDF

KEL-QTA PDF

​Slit cable entry plate for tool-free assembly, IP54
Slit M20 cable entry plate made of elastomer for cables with or without connectors. Tool-free mounting.
​

>> KEL-QTE

PART NO. LIST

KEL-QTE 20/2,5
KEL-QTE 20/3
KEL-QTE 20/4
KEL-QTE 20/5
_________________
​43412
43413
43414
43415

DOWNLOAD PDF

KEL-QTE SERIES 

​Split brush plates for cable pass-through
Suitable for cut-outs of heavy industrial connectors. Mounting via screws or expanding rivets.
​

>> KEL-BES-S 

PART NO. LIST

KEL-BES-S 10 black
KEL-BES-S 10 black with expanding rivets
KEL-BES-S 16 black
KEL-BES-S 16 black with expanding rivets
KEL-BES-S 24 black
KEL-BES-S 24 black with expanding rivets
KEL-BES-S 32 black
KEL-BES-S 50  black
51520
51520.002
51521
51521.002
51522
51522.002
51538
51540

DOWNLOAD PDF

KEL-BES-S 
SERIES PDF

Cable grommets
Split cable grommets for prefabricated cables, multi-range grommets, special grommets for e.g. telephone cables, flat wires or supply lines.

>> Cable Grommets

PART NO. LIST

DOWNLOAD PDF

Cable Grommets

IMAS-CONNECT™ Adapter grommets
Adapter grommets with inner threads and for mounting of Keystone and PushPull modules.
​

>> ​​IMAS-CONNECT™

PART NO. LIST

AT-M 12 x 1,0 grommet large
AT-B grommet large with blind plate
AT-M 16 x 1,5 grommet large
AT-M 20 x 1,5 grommet large
AT-M 25 x 1,5 grommet large
AT-K-M 12 x 1,5
AT-K-M 12 x 1,0
AT-K-M 8 x 1,0
AT-K-M 5 x 0,5
AT-K-M 16 x 1,5 grommet small with thread insert
AT-K-M 14 x 1,0
AT-K-Z 1/8 Inch thread grommet small
AT-K-Z 1/4 Inch thread grommet small
___________________
39946
39950
39947
39948
39949
39956
39955
39954
39953
39957
39962
39963
39964

DOWNLOAD PDF

​​IMAS-CONNECT™

​icotek cable entry systems - completely splittable, high cable density

Cable grommets for cable entry frames

Learn More

​The icotek cable entry system is completely split. Thus, a quick and easy assembly is possible. The preterminated cable is placed into the » split grommet which is set into one of the cable entry frame’s compartments. The grommet is now securely fixed inside the frame and can’t fall out. Due to the fine gradation of the cable diameters, there is an excellent adaptation of the grommet to the inserted cable or hose. 

​Once the lid is affixed to the base frame, it is compressed and tightly sealed. The high compression pressure ensures strain relief according to EN 62444 and certified sealing rates up to IP66 (acc. to EN 60529) and UL type 4X (acc. to UL 50E).
​Another benefit is the high cable density of the cable entry systems that enable a space-saving assembly. For example, when using multiple grommets with some specific frame sizes, up to 120 lines can be routed in an area of 15 × 15 cm.

​Large variety of cable entry systems

​​The different model ranges of the icotek split cable entry systems offer various application possibilities:
​

• For cable routing (up to 35 mm in diameter) in extreme areas the » cable entry system KEL-ER offers high protection ratings IP66 / UL Type 4X*. Available in 8 different sizes.
• Similarly, icotek offers the » cable entry system KEL-U in the same sizes, with protection rating IP54 / UL Type 12.
• The centrally split » cable entry system KEL is an icotek classic (protection ratings IP54 / UL Type 12) which, due to its extensions, offers the highest cable density. Cables and hoses with diameters up to 35 mm can be routed.
• The » cable entry systems KEL-FA, » KEL-QUICK and » KEL-QTA (protection rating IP54) impress with the possibility of quick and consistently tool-free installation. Available in many different sizes.

• For routing cables in a 90° angle (protection rating IP54) icotek offers the » cable entry system KEL-FG in 5 different sizes.
• For routing flat cables (as well in combination with pre-terminated round cables) the » cable entry system KEL-FL is the perfect choice.
• For routing large diameter supply lines or hoses with up to 75 mm in diameter icotek offers the » cable entry systems KEL-JUMBO and » KEL 183.
• For applications with lower requirements on ingress protection icotek offers » cable pass-through plates with brush seal, specifically designed to feed cables easily into server racks, control panels and through raised floors and walls.
• *4X for indoor use only

​icotek.asia | icotek - Split cable entry systems for cables with connectors
waterproof with up to IP66 seal
​​icotek Malaysia Authorized Distributors | Pengedar icotek di Malaysia | icotek Thailand Authorized Distributors |  icotek ตัวแทนจำหน่ายในประเทศไทย | icotek Indonesia Distributors | icotek Singapore Distributors  | icotek Philippines Distributors | mga distributor sa icotek | mga distributor ng icotek |  icotek Vietnam Distributors | icotek Myanmar Distributors | អ្នកចែកចាយ icotek  | icotek Burma Distributors  | icotek Laos Distributors | ຕົວແທນຈໍາຫນ່າຍ icotek | icotek Brunei Distributors | icotek Timor Leste |Distributors | distribuidores icotek | icotek Nepal Distributors | icotek वितरकहरू | icotek Bangladesh Distributors | icotek পরিবেশক | icotek Sri-Lanka Distributors | icotek බෙදාහරින්නන් | icotek Cambodia Distributors | icotek Pakistan Distributors | icotek Bhutan Distributors | icotek Africa | icotek verspreiders | icotek 经销商 | nhà phân phối icotek | pemasok icotek | icotek ဖြန့်ဖြူးသူများ | الموزعين icotek | icotekディストリビューター | icotek 대리점 | icotek ประเทศไทย ซัพพลายเออร์ | icotek ਥਾਈਲੈਂਡ ਸਪਲਾਇਰ​

​icotek Split cable entry system for cable with connectors - distributors | copyright 2022 icotek.asia | all right reserved

icotek split Cable Entry System >> icotek central Distributors | icotek Authorized Distributors : Smart Cable Management |icotek group |icotek Distributors |icotek Reseller | icotek Agents | icotek Partners | icotek installer |icotek offices |icotek Split Cable Entry System | icotek Split Cable Glands Entry | icotek Cable Grommets | icotek IMAS-CONNECT™ | icotek EMC Cable Shields Clamps | icotek Split EMC cable entry systems | icotek Cable pass-through with brush seal | icotek Strain relief for cable managements | icotek CONFiX™ cable conduit system | icotek Enclosure & Control panel accessories | icotek TOOLs | icotek Cable Entry systems for railways technology | icotek hygienic cable entry plates | icotek cleanroom cable entry systems | ​#icotek | #cablemanagement | #cableentrysystem | #Splitcableentry | #imasconnect | #icotektools | #cablegrommets | #confixconduit | #hygieniccableentry | #cableentryplates | #cableglands | #splitemccableentry | #strainrelief | #emcshieldclamps | #brushseal #icotekasia | #icotekdistributors | #icotekgroup | #icotekmalaysia | #icotekthailand | #icotekindonesia | #icoteksingapore | #icotekphilippines | #icotekvietnam | #icotekmynmar | #icotekpakistan | #icoteksrilanka | #icoteknepal | #icotekbrunei | #icotekbangladesh | #icotekproducts | ​| icotek Malaysia Distributors | icotek Thailand Distributors | icotek Indonesia Distributors  | icotek Singapore Distributors | icotek Philippines Distributors | icotek Vietnam Distributors  | icotek Myanmar Distributors | icotek Burma Distributors | icotek Laos Distributors| icotek Brunei | icotek Timor Leste Distributors | icotek Nepal Distributors  | icotek Bangladesh Distributors | icotek Sri-Lanka Distributors | icotek Cambodia Distributors | icotek Pakistan Distributors  | icotek Asia distributors | icotek Bhutan Distributors | ​| icotek hygienic | icotek 42216 | icotek products | icotek cable glands | icotek group | icotek 41215 | icotek conduit | icotek configurator | icotek catalog | icotek 39935 | icotek 36860 | icotek germany | icotek india | icotek japan | icotek korea | icotek connectors | icotek plug | icotek ST | icotek kel-er | icotek kel-u | icotek kel-fa | icotek kel | icotek kel-fg-er | icotek kel-quick | icotek kel-fl | icotek kel-183 | icotek kel-jumbo | icotek kel-snap | icotek cover plug | icotek kel-qta | icotek kel-qte | icotek kel-bes-s | icotek kvt-er | icotek kvt | icotek kvt-w90 | icotek kvt-snap | icotek kvt-80 | icotek qvt | icotek qvt-click | icotek kgm | icotek gtm | icotek kvt-emc | icotek kel-dpz-click | icotek kel-dpz | icotek kel-dpz-hd | icotek kel-dpu | icotek kel-dp | icotek kel-scdp | icotek kel-dpf | icotek kel-ultra-flex | icotek kel-jumbo-flex | icotek st-plug | icotek st-b | icotek st-b-hdd | icotek Productfinder | icotek quickproducts overviews | icotek round plates | icotek FDA compliant | icotek gmbh | icotek Products | icotek Grommets Distributors | icotek cable glands distributors | ADVFIT Automation - icotek Authorized Distributors | icotek Malaysia - ADVFIT Distributors | icotek Distributor -ADVFIT Automation Thailand | icotek Penang | icotek Perak | icotek Selangot | icotek Kuala Lumpur | icotek Melaka | icotek sabah | icotek Kota Kinabalu | icotek Kuching | icotek Sandakan | icotek Kuantan | icotek Kota Bahru | icotek ipoh | icotek Kulim | icotek Sg Petani | icotek Hatyai | icotek Chonburi | icotek Bangkok | icotek Samut Prakan | icotek Johor | icotek Nilai | icotek Seremban | icotek Bemban | icotek surabaya | icotek Jakarta | icotek Kuantan | icotek prai | icotek padang Meiha | icotek Batu Kawan | icotek Bayan Lepas | icotek Suntech | icotek rayong | icotek Phuket | icotek pattaya | icotek nonthaburi | icotek Pathum Thani | icotek Ayutthaya | icotek Khon Kaen | icotek Surin | icotek Phetchabun | icotek Nakhon Sawan | icotek Chiang Mai | icotek nan | ioctek Bang pu | icotek Bang Na | icotek Pattani | icotek Songkhla | icotek Trang | icotek Satun | icotek Narathiwat | icotek Yala | icotek Phetchaburi | icotek Hua hin | icotek Nonthaburi | icotek BangSue | icotek Bang Pa-in | icotek Bang kadi | icotek Suphan Buri | icotek Nakhon Sawan | icotek Uthai Thani | icotek saraburi | icotek Nong Khae | icotek Udonthani | icotek Buriram