Cable Grommets - For cable entry systems 
- icotek สายเคเบิล "grommets" สำหรับเฟรมป้อนสายเคเบิล  |  icotek Kabel Grommet - Untuk sistem entri kabel |  icotek Cable Grommets - Para sa mga cable entry system |  icotek Cáp Grommets - Dành cho hệ thống đầu vào cáp
​icotek Cable grommets at a glance
Cable grommets for cable entry frames: 
Split cable grommets for prefabricated cables, multi-range grommets, special grommets for e.g. telephone cables, flat wires or supply lines. Suitable for icotek split cable entry frames and cable glands.
 More info »
The KTMBS cable grommet for the KEL system enables routing of cables with and without connectors, the diameters can vary by up to 3 mm.
The KEL-FA series is a compact system for routing and sealing cables with and without connectors, as well as hoses and pneumatic cables. After the frame has been equipped with the KT cable grommet system, the cover is put on and the two clamping levers are locked with the lower part by pressing them down. The twist-proof construction of the KEL-FA enables intuitive assembly.
​Split cable grommets, grey, IP66/IP68 / UL Type 12/4X*
Split cable grommets for diameters of 1 to 17 and 16 - 35 mm. Suitable for KEL cable entry frames and KVT cable glands.
>> KT Grey
PART NO. LIST
DOWNLOAD PDF
​Split cable grommets, black, IP66/IP68
Split cable grommets for diameters of 1 to 17 and 16 - 35 mm. Suitable for KEL cable entry frames and KVT cable glands. Higher chemical resistance.
>> KT Black 
PART NO. LIST
DOWNLOAD PDF
​Split multi / special cable grommets, grey, IP54 / UL Type 12
Split cable grommets for diameters of 1 to 8 mm as well as for special cables. Suitable for KEL cable entry frames and KVT cable glands.
>> KT Multi Grey
PART NO. LIST
​DOWNLOAD PDF
​Split multi / special cable grommets, black, IP54
Split cable grommets for diameters of 1 to 8 mm as well as for special cables. Suitable for KEL cable entry frames and KVT cable glands. Higher chemical resistance.
>> KT multi black 
PART NO. LIST
DOWNLOAD PDF
​Split multi-range cable grommets, IP54 / UL Type 12
Split cable grommets for diameters 4 - 29 mm. Suitable for KEL cable entry frames and KVT cable glands.
>> KTMBS
PART NO. LIST
​DOWNLOAD PDF
​Multi-range cable grommets in pyramid shape, grey, IP54 / UL Type 12
Flexible pyramid shaped cable grommet with multi range for various cable diameters 3 - 26 mm. Enhanced strain relief possible via cable ties.
>> KT-DPF
PART NO. LIST
DOWNLOAD PDF
​Multi-range cable grommets in pyramid shape, black, IP54
Flexible pyramid shaped cable grommet with multi range for various cable diameters 3 - 26 mm. Enhanced strain relief possible via cable ties. Higher chemical resistance.
>> KT-DPF Black
PART NO. LIST
DOWNLOAD PDF
​Flexible multi-range cable grommets, IP54
Flexible multi range cable grommets with peelable membrane rings for various cable diameters 5 - 28 mm.
>>  KT-SC
PART NO. LIST
DOWNLOAD PDF
​Multi-range cable grommets, IP54 / UL Type 12
Flexible multi range cable grommets for various cable diameters 2.5 - 33 mm.
>> KTMB
PART NO. LIST
DOWNLOAD PDF
​Large multi-range cable grommets for KEL 183, IP54 / UL Type 12
Large flexible cable grommets with multi range for cable diameters of up to 75 mm. Suitable for cable entry KEL 183.
>>  KTMB 183
PART NO. LIST
DOWNLOAD PDF
​Large split cable grommets for KEL-JUMBO, IP54 / UL Type 12
Large slit cable grommet for preassembled cable diameters of up to 65 mm. Suitable for KEL-JUMBO.
>> KTF
PART NO. LIST
DOWNLOAD PDF
​Cable grommets for flat cables, IP54

Cable grommets for flat cables. Used in KEL-FL cable entries.
>> FT 
PART NO. LIST
DOWNLOAD PDF
​Multi-membrane cable grommets, IP54 / UL Type 12
Multi membrane cable grommets based on the KT grommets for routing of several standard cables with varying diameters.
>> KT-DT
PART NO. LIST
DOWNLOAD PDF
​Split QUICK cable grommets, IP54
Split cable grommets for diameters 1 to 15 mm. Suitable for KEL-QUICK cable entry frames and QVT cable glands.
>> QT 
PART NO. LIST
DOWNLOAD PDF
​Split QUICK multi-range cable grommets, IP54
​Split cable grommets for diameters 14 - 29 mm. Suitable for KEL-QUICK cable entry frames and QVT-CLICK cable glands.
>> QTMB
PART NO. LIST
DOWNLOAD PDF
​QUICK multi-membrane cable grommets, grey, IP54
Multi membrane cable grommets based on the QT grommets for routing of several standard cables with varying diameters.
>> QT-DT
PART NO. LIST
DOWNLOAD PDF
​IMAS-CONNECT™ Adapter grommets
Adapter grommets with inner threads and for mounting of Keystone and Push-Pull modules.
>> IMAS-CONNECT™
PART NO. LIST
DOWNLOAD PDF
Split EMC cable grommets for cables with connectors
Split conductive EMC grommets for cable shield diameters from 2 to 16 mm or 13 to 33 mm.
>> EMC-KT 
PART NO. LIST
DOWNLOAD PDF
​Split cleanroom cable grommets, IP66/IP68 / UL Type 12/4X*
Split cable grommets for diameters of 1 to 17 and 16 - 35 mm. Suitable for KEL CR cable entry frames.
>> KT CR
PART NO. LIST
DOWNLOAD PDF
​Split multi / special cleanroom cable grommets, IP54 / UL Type 12
Split cable grommets for diameters of 1 to 8 mm. Suitable for KEL CR cable entry frames.
>> KT CR multi
PART NO. LIST
DOWNLOAD PDF
​Plugs for split cable grommets
​Plugs for sealing unused split KT and QT cable grommets.
>> ST plugs
PART NO. LIST
DOWNLOAD PDF
​Pressure compensation element with metric thread, IP68
Pressure compensation element with metric thread to avoid water condensation in highly sealed enclosures (IP68)
>> PCE